Board Blanking
'
The proper procedure to sucessfully blank and reconfigure a board is  as
follows.
'
   1. Blank the board from the BLANKING Menu of this program.
'
   2. Load your Motorola RSS software and choose (F2) Service.
'
   3. Choose (F6) Board replacement then (F2) again for Logic Board.
'
   4. From the menu choose by using the cursor keys  which model of radio
      you wish this one to become,  taking into account if this radio has
      a MASKED board or an EXPANDED one with an expansion connector.
'
      Remember,   you can only upgrade a radio that has the capability to
      be upgraded.  Do not try and  configure  a radio with signalling if
      it is a masked board. To upgrade a Radius to 32 channels it must be
      an EXPANDED board and you MUST use the MaxTrac software.

