=======================================================

  SOFTWARE RELEASE NOTE for the GM950 RSS R02.00.00

=======================================================
 
PRODUCT:        GM950 RSS
KIT No.:        ENVN4037B
VERSION:        R02.00.00 
DATE OF BUILD:  30 Oct 1997

=======================================================

               Purpose of this release

=======================================================

Supports new N4 RU models/functionality.

Language Support
----------------
English, German, Spanish, French and Italian supported.

General note
------------
All Edit windows should be closed before the Validation 
function is used.

Use Tab to navigate around File access screens instead 
of hot keys.

If Tab is used to navigate on edit screens and the focus 
on the fields is lost, please close the screen and open 
it again. 

If any screen element on an edit screen is not visible 
because of a missing screen refresh, please close the 
screen and open it again.  

If External Alarm is selected, please ensure that a GP 
I/O line is programmed for this function.

When in the Multicall screen, the first three variable 
tones from left to right will have a selection range and 
lockout digit as defined at the bottom of that screen.

In VGA mode some validation log messages may extend 
beyond the window limits. To overcome this, move the
window off the left hand side of the screen and
extend the right hand edge of the validation log
window to view the message(s).

If you minimise the application when an error message
is displayed then the application can be restored by
selecting ALT+TAB.

Note for Windows NT user who need a dongle
------------------------------------------
For Windows NT a device driver is necessary to use the 
dongle. Without the device driver the dongle will not be 
detected by the RSS.

The device driver can be found on the WEB on the home page 
of Rainbow Technologies. The device driver can be 
downloaded from the following page: 
http://www.rainbow.com/tech/drivers/index.html

Use the driver listed as: System Driver for Windows NT 
(up to and including NT 4.0). Follow the installation 
instructions provided in the file Readme.txt.