    KPG-27D Help File  Version 3.00
    File name : KPG27D.HLP  12-09-1996  Y57-3270-20

    Modification History:
    Version  Release Date      Description
     1.00    01/28/'96     KPG-27D First Version
     2.00    07/25/'96     Change 2-Tone Frequency and BCL (TK-208 Type)
     3.00    12/09/'96     Add to TK-388, Change the 2-Tone band width.
	 
General Help
Revisions for Version 3.00
 1.For the TK-388 newly designed, see the help screen for Model menu.
   
*** [ General Help ] ***
 Along the top border of the main program screen (Channel Information) are
the "drop down" menus. 
 Press  [ALT] and use the arrow keys --> <-- to select a program section.
 Help is available for each menu by pressing the F1 key.
 Pressing F1 will load its Help screen. 
 To get familiar with the computer key functions used in the KPG-27D, press
[ALT] now; select Keyboard Help; press [ENTER].
 Within a Help screen use the cursor up/down keys to scroll, F5 to print a
hard copy, and [ESC] or [ALT] to escape the screen.
 Refer to the KPG-27D Instruction Manual for additional Help. 

**Basic use instructions (use F1 for Help in each program section below)**

A. [CREATING PROGRAMMING DATA FOR A RADIO]
  1. Open the "Model" menu and select the appropriate model and frequency 
    range.
  2. Open the "Edit-Key Assignment" menu; and select "Key Assignment".
     Assign functions to each key on the panel.
  3. Open the "Edit-Optional Feature" menu;
     Set the general built-in features.
  4. Open the "Edit-DTMF" menu;
     Set the DTMF features & parameters.
  5. Open the "Edit-2-Tone" menu;
     Set the 2-Tone features & parameters.(TK-260/360 and 270/370 only)
  6. Open the "Edit-Scan Information" menu;
     Set the SCAN features & parameters.(TK-270/370 and TK-278/378/388 only)
  7. Open the "Edit-Trunking" menu;
     Set the Trunking features & parameters.
	 (TK-270/370 and TK-278/378/388 only)
     A "blank" window in Edit-Trunking screen will not program or re-program
    a trunking board even if a "Program-Write to Trunking Board" command is 
    executed.
  8. Hit ESC; the cursor will move to the main screen, "Channel Information
    Screen".

B. [Test Mode]
     Open the "Program-Test mode" menu;
     Connect the radio to measure equipment correctly.
     Please use Tuning Cable (service parts) for mainly deviation tune.
     Test a radio and set specific radio adjustments.

C. [PROGRAM A RADIO]
  1. Open the "Program" menu.
  2. Select "Write to Radio".
D. [PROGRAM A Trunking BOARD]
  1. Open the "Program" menu.
  2. Select "Write to Trunking Board".(TK-270/370 and TK-278/378/388 only)
E. [SAVE PROGRAMMING DATA TO DISK FILE]
  1. Open the "File" menu.
  2. Select "Save" for quick save to the "default" or "current" filename, or
    "Save As" to name or rename the file.

                *****Organizational chart of the KPG-27D*****
[ MAIN SCREEN ]
 +-- FILE -----+- New
 |             +- Load
 |             +- Save  (=F4)
 |             +- Save As
 |             +- Delete
 |             +- Print (=F5)
 |             +- Go to DOS
 |             +- Exit  (=F3)
 +-- MODEL ----+- TK-260
 |             +- TK-270
 |             +- TK-278
 |             +- TK-360
 |             +- TK-370
 |             +- TK-378/388
 +-- EDIT -----+- Key Assignment ---+- MONI Key
 |             |                    +- SCAN Key 
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- DIAL Key
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- TA Key 
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- LO Key
 |             |This feature is not available in TK-260 or TK-360.
 |             +- Optional Feature -+- Time Out Timer (TOT)
 |             |                    +- TOT Pre-Alert
 |             |                    +- TOT Rekey Time
 |             |                    +- TOT Reset Time
 |             |                    +- Squelch Level
 |             |                    +- Beep Tone
 |             |                    +- Signalling
 |             |                    +- Battery Save 
 |             |                    +- Clr to Transpond
 |             |                    +- Selectable QT
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- DEL/ADD
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Dealer/Test Mode
 |             |This feature is not available in TK-260 or TK-360.
 |             +- DTMF -------------+- Digit Time
 |             |                    +- Inter Digit Time
 |             |                    +- First Digit Time
 |             |                    +- Rise Time
 |             |                    +- Rise Time with QT(CTCSS)
 |             |                    +- PTT ID
 |             |                    +- Dial ID 
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Connect ID
 |             |                    +- Disconnect ID
 |             |                    +- No. of DTMF Key
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- DTMF Hold Time
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Store and Send
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- D Key Assignment
 |             |                    +- Autodial Memory 
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- DTMF Signalling
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Intermediate Code
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Group Call
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Auto Reset Time
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Call Alert/Transpond
 |             |This feature is not available in TK-260 or TK-360.
 |             |                    +- Transpond 
 |             |This feature is not available in TK-260 or TK-360.
 |             +- 2-Tone
 |             |Following features are not available in TK-278 or
 |             |TK-378/388.
 |             |                    +- Tone 1
 |             |                    +- Tone 2
 |             |                    +- Group Call
 |             |                    +- Alert Tone/Transpond
 |             |                    +- Auto Reset
 |             +- Scan Information
 |             |Following features are not available in TK-260 or TK-360.
 |             |                    +- Priority
 |             |                    +- Look Back Time A
 |             |                    +- Look Back Time B
 |             |                    +- Revert Channel
 |             |                    +- Dropout Delay Time
 |             |                    +- TX Dwell Time
 |             +- Trunking
 |             |Following features are not available in TK-260 or TK-360.
 |             |                    +- Number of Trunking Channels
 |             |                    +- Primary Code
 |             |                    +- Secondary Code
 |             |                    +- Priority Subscriber Enable
 |             |                    +- Five Digit Access Code
 |             |                    +- Trunking System ID Number
 |             |                    +- Automatic PTT Mode
 |             |                    +- Emergency Call Override
 |             |                    +- Conventional Mode Control
 |             |                    +- Clear Channel Alerting Mode
 |             |                    +- Radio-Kill
 |             |                    +- Memory Speed-Dialing Programming
 +-- CHANNEL --+- RX Frequency
 |             +- TX Frequency
 |             +- QT/DQT Decode
 |                DQT feature is not available in TK-278 or TK-378/388.
 |             +- QT/DQT Encode
 |                DQT feature is not available in TK-278 or TK-378/388.
 |             +- Option Signalling
 |             +- PTT ID
 |             +- Busy Channel Lockout
 |             +- Beat Shift
 |             +- RF Power
 |             +- Scan DEL/ADD 
 |                This feature is not available in TK-260 or TK-360.
 |             +- ID Code 
 |                This feature is not available in TK-260 or TK-360.
 |             +- Priority Channel Set
 |                (press F10 to set Fixed Priority Channel)
 |                This feature is not available in TK-260 or TK-360.
 |             +- Channel Copy
 |             +- Frequency Copy
 |             +- QT/DQT Copy
 |             +- Channel Insert
 |             +- Channel Delete
 +-- PROGRAM --+- Read from Radio
 |             +- Write to Radio
 |             +- Test Mode --------+- RF High Power
 |                                  +- RF Low Power
 |                                  +- Battery Level
 |                                  +- Squelch Level(Tight)
 |                                  +- Squelch Level(Open)
 |                                  +- QT Deviation
 |                                  +- DQT Deviation
 |                                  +- Print Tuning Data 
 |             +- Write to Trunking Board
 |             |This feature is not available in TK-260 or TK-360.
 +-- SETUP ----+- Communication Port
 |             +- Display Color ----+- Display Back Color
 |             |                    +- Input Data Color
 |             |                    +- Feature Highlight Color
 |             |                    +- Screen Border Information Color
 |             |                    +- Windows Menu Color
 |             |                    +- General Message Color
 |             |                    +- Windows Color
 |             |                    +- Help Window Color
 |             +- Help Path
 +-- HELP -----+- General Help
               +- Keyboard Help (Computer Keyboard)


Keyboard Help
*** [ Computer Keyboard Help ] ***
 Available key functions are displayed at the bottom and top of the screen.

 ESC            : Returns to the main screen; called the Channel Information
                 Screen. (exits menus & sub-screens).
 ALT            : "Go to menu" or "Go back" to previous screen.
 Arrow Keys     : Moves cursor within a data input field; scrolls Help
                 screens.
 PgUp & PgDn    : Pages up/down in General or Keyboard Help screens.
 F1             : Opens a Help screen.
 F2             : Toggles yes/no feature selections or increases selection 
                 in data fields. (same as [SPACE BAR])
                  Opens QT/DQT list when cursor is in QT/DQT field.
                 TX and RX control while in the Test and Tuning Mode.
 F3             : Exits from this program and return to the DOS prompt.
 F4             : Saves the current program data with the current file name.
 F5             : Prints the current data, Tuning data or Help screen.
 F7             : Next page (same as page up).
                  This feature is not available in TK-260 or TK-360.
 F8             : Previous page  (same as page down).
                  This feature is not available in TK-260 or TK-360.
 F10            : Sets the Priority channel.
                  This feature is not available in TK-260 or TK-360.
 Shift+F2       : Opposite function as the [F2].
 Shift+F3       : Copies an entire channel to another group.
 Shift+F4       : Copies an RX frequency column entry to a TX frequency 
                 column.
 Shift+F5       : Copies the data of QT/DQT from a QT/DQT decode column
                 to the encode column.
 Shift+F9       : Channel Insert (inserts a blank channel row and moves the
                 current channel data & all subsequent channels to the next
                 channel row).
 Shift+F10      : Channel Delete (deletes the current channel data row and 
                 go back all subsequent channel rows by one).
 HOME           : Jumps to channel 1 of the Channel screen, or to page 1 of
                 a help screen.
 END            : Jumps to the last channel(Ch 4 or Ch 32) of the Channel
                 screen.
                  Or to the last page of a help screen.
 ENTER          : Enters data into a program field, or opens a selected
                 window.
 SPACE BAR      : Toggles yes/no feature selections, increases selection in
                 data files, or clears data. (same as [F2]) TX and RX 
                 control while in the Test Mode. 
                  Shift+SPACE BAR: Opposite function of the [SPACE BAR].
 
New File Help (CLEAR FILE)
 The New function clears any currently loaded, read or created data
file. 
 All program data screens will be set to defaults.

Load Help
 The Load function is used to retrieve a stored data file from a
hard disk or floppy disk to be modified, viewed, written
(program a radio) or printed out.
 A directory of stored files, sorted alphabetically, will be
displayed for selection.

Save Help
 Saves the current program data with current file name.

Save As Help
 Saves with the option of assigning a "new" file name, or renaming an
existing file.

Delete Help
 The Delete function is used to remove any stored data files from the
directory of stored files.

Print Help
 Prints all radio programming data currently loaded into the program:
    - Model Name
    - File Name
    - Key Assignment
    - Optional Feature
    - DTMF
    - 2-Tone
       These program settings do not print when the Model Type is
      TK-278 or TK-378/388.
    - Scan Information 
       These program settings do not print when the Model Type is
      TK-260 or TK-360.
    - Trunking
       These program settings do not print when the Model Type is
      TK-260 or TK-360.
    - Channel Information
    - Priority Channel Information
       This program setting does not print when the Model Type is
      TK-260 or TK-360.

Go to Dos Help
 Go back to the DOS prompt temporarily.
 Type EXIT and press [ENTER] to quit the DOS prompt and return to the
KPG-27D program.

 Note: The KPG-27D program can support this command only if your 
computer has sufficient memory.

Exit Help
 Quits this program and returns to the DOS prompt.

TK-260 Help
 TK-260      : Maximum 4 Channels.
 Frequency band
  F1: 150-174MHz
  F2: 136-150MHz

 The model name arrows a programmable frequency range of KPG-27D.

TK-270 Help
 TK-270      : Maximum 32 channels.
 Frequency band
  F1: 150-174MHz
  F2: 136-150MHz

 The model name arrows a programmable frequency range of KPG-27D.

TK-278 Help
 TK-278      : Maximum 32 channels.
 Frequency band
  F1: 150-174MHz
  F2: 136-150MHz

 The model name arrows a programmable frequency range of KPG-27D.

TK-360 Help
 TK-360      : Maximum 4 channels.
 Frequency band
  F1: 450-470MHz
  F2: 470-490MHz
  F3: 490-512MHz
  F4: 406-430MHz

 The model name arrows a programmable frequency range of KPG-27D.

TK-370 Help
 TK-370      : Maximum 32 channels.
 Frequency band
  F1: 450-470MHz
  F2: 470-490MHz
  F3: 490-512MHz
  F4: 406-430MHz

 The model name arrows a programmable frequency range of KPG-27D.

TK-378/388 Help
 TK-378/388  : Maximum 32 channels.
 Frequency band
  F1: 450-470MHz
  SP: 350-420MHz

  TK-378 F4: 400-420MHz
  TK-388 F5: 370-390MHz
  TK-388 F6: 350-370MHz

 The model name arrows a programmable frequency range of KPG-27D.

MONI Key Help
 The MONI Key can be programmed for one of four functions;
Monitor Momentary, Monitor Lock, SQ Off Momentary or Off.

 Off              : Disables MONI Key function.
 Monitor Momentary: Carrier Squelch function while pressing the key.
 Monitor Lock     : Toggles between Carrier Squelch/Tone Squelch
                   function.
                    This feature is not available in TK-260 or 
                   TK-360.
 SQ Off Momentary : Unmute function while pressing the key.
 Default          : Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

SCAN Key Help
 This feature is not available in TK-260 or TK-360.

 The Scan key can be programmed for one of three functions;
Carrier Operate, Time Operate or Off.

 Off             : Disables SCAN Key function.
 Carrier Operate : Selecting "Carrier Operate" causes the scan to
                  stop and restart with the detection of carrier
                  (and QT/DQT if set ) on a channel; this is the
                  traditional type scan operation.
 Time Operate    : Selecting "Time Operate" causes the scan to
                  stop with the detection of carrier (and QT/DQT
                  if set) on a channel, however, scan resumes
                  when the "Dropout Delay Time" (works as Time
                  Operate Time) expires even if carrier is still
                  present.
                   Refer "Dropout Delay Time" in the scan
                  information screen.
                   The "TX Dwell Time" is not effective in "Time
                  Operate" scan. 
                   "Time Operate" scan is controlled only by 
                  "Dropout Delay Time" (works as Time Operate Time).
                   Time Operate method is not effective in priority
                  scan. 
                   Priority scan works on Carrier Operate method even
                  if SCAN key is programmed to "Time Operate".
 Default         : Carrier Operate.

 Press the [F2] or [SPACE BAR] to alternate selection.

DIAL Key Help
 This feature is not available in TK-260 or TK-360.

 The Dial Key can be programmed for either Enable or Disable.

 Enable : Enables the DIAL function.
          You can use Auto dial, Dial ID functions.
 Disable: Disables the DIAL function.
          You can not use Auto Dial, Dial ID functions. 
 Default: Enable.

 Press the [F2] or [SPACE BAR] to alternate selection.
 
TA Key Help
 This feature is not available in TK-260 or TK-360.

 The TA Key can be programmed for one of three functions; 
Talk Around, Reverse or Off.

 Off        : Disables TA Key function.
 Talk Around: The radio transmits with the receive frequency and 
             tone.
 Reverse    : Frequency and tone are exchanged between transmit and
             receive.
 Default    : Talk Around.

 Press the [F2] or [SPACE BAR] to alternate selection.

LO Key Help
 This feature is not available in TK-260 or TK-360.

 The LO Key can be programmed for either Enable or Disable.

 Enable : Enables the LO function.
          You can change the transmission power to Low on the channel
         programmed to high.
 Disable: Disables the LO function.
 Default: Enable.

 Press the [F2] or [SPACE BAR] to alternate selection.

Priority Help
 This feature is not available in TK-260 or TK-360.

 Priority channel selection.
 If you set the priority Fixed or Selected, the scan mode works
only on Carrier Operated method. 
 Time Operate method is not effective in this condition.

 None    : Priority Channel is not selected. 
           Non-priority scan only.
 Fixed   : You must select it in the channel information screen.
          (F10 key)
 Selected: The selected channel before scan is initiated becomes the
          Priority Channel.
 Default : None.

 Press the [F2] or [SPACE BAR] to alternate selection.

Look Back Time A Help
 This feature is not available in TK-260 or TK-360.

 Priority channel checking intervals while receiving on a 
non-priority channel.
 The radio's CPU chooses either Lookback time A or B depending on the
priority channel activity --Program both times.
 Priority channel is not busy (no carrier detected).
 This time is typically set shorter than Lookback B, since the 
priority ch. should be checked more often to prevent missing a call.

 Range  : 0.5 to 1.5 s (0.1 s steps)
 Default: 0.5 s

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.
 
Look Back Time B Help
 This feature is not available in TK-260 or TK-360.

 Priority channel checking intervals while receiving on a 
non-priority channel.
 The radio's CPU chooses either Lookback time A or B depending on the
priority channel activity --Program both times.
 Priority channel is busy, but tone squelched.
 This time is typically set long because the priority ch. is busy 
with another caller using a different tone.

 Range  : 0.5 to 5.0 s (0.5 s steps)
 Default: 2.0 s

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Revert Channel Help
 This feature is not available in TK-260 or TK-360.

 In scan mode the radio can be programmed to revert to a certain 
channel upon PTT.
 This allows the radio to be customized to the users transmission
requirements while using scan.
 The revert channel types are Selected, Selected plus Talkback, 
Last Called, Last Used plus Talkback, Priority and Priority plus 
Talkback.
 In all cases the user has the capability to manually select a 
channel for transmission. 
(this resets the revert to the selected channel)
 
 Selected     : The radio reverts to the channel set by the channel
               selector knob prior to scan initiation. 
 Last Called  : The radio reverts to the channel upon which a call 
               was last received even if scanning has resumed (power
               on default = selected channel).
                This is convenient for users that may commonly 
               receive calls on several channels and desire the radio
               to always respond on the last call received 
               (especially if the user is not normally able to 
               respond immediately before scan resumes).
 Last Used+Talkback:
                The radio reverts to the channel which was last 
               transmitted on (power on default = selected channel),
               however, if a call is received on a channel other 
               than the last transmit channel and PTT is pressed 
               before scanning resumes, the radio "talks back" on the
               current receive channel (scan resume time is dependent
               on the Dropout Delay and TX Dwell time settings).
                If PTT is pressed after scan resumes, the radio will
               transmit on the last transmit channel.
                This is convenient for users that always want to 
               transmit on the channel they are currently using and 
               do not want the revert channel to be constantly 
               changed by other channel traffic, but need to 
               immediately respond to calls on any other channel 
               without having to determine which channel the call was
               received on and then manually switch to that channel. 
 Selected+Talkback :
                The radio reverts to the channel set by the channel 
               selector knob prior to scan initiation, however, if a
               call is received on a channel other than the selected
               channel and PTT is pressed before scanning resumes, 
               the radio "talks back" on the current receive channel
               (scan resume time is dependent on the Dropout Delay 
               and TX Dwell Time settings).
                If PTT is pressed after scan resumes, the radio will
               transmit on the selected channel.
                This is convenient for users who normally want to 
               transmit on the selected channel, but need to 
               immediately respond to calls on any other channel 
               without having to determine which channel the call was
               received on and then manually switch to that channel. 
 Priority     : The radio always reverts to the priority channel.
                This is convenient for users that almost always need
               to transmit on the priority channel.
 Priority+Talkback
              : The radio always reverts to the priority channel, 
               however, if a call is received on a channel other 
               than the priority channel and PTT is pressed before
               scanning resumes, the radio "talks back" on the 
               current receive channel(scan resume time is dependent
               on the Dropout Delay and TX Dwell Time settings), If 
               PTT is pressed after scan resumes, the radio will 
               transmit on the priority channel, This is convenient 
               for users that almost always need to transmit on the 
               priority channel, but need to immediately respond to 
               calls on any other channel without having to determine 
               which channel the call was received on and then 
               manually switch to that channel.
 Default      :Last Called.

 Press the [F2] or [SPACE BAR] to alternate selection.


Dropout Delay Time Help
 This feature is not available in TK-260 or TK-360.

 Drop out delay time interval from the end of a received call
to the time scan automatically resumes when scan key is programmed
to "Carrier Operate".
 It works as Time Operate time when scan key is programmed
to "Time Operate".
 Time Operate time interval from the beginning of a received
call to the time scan automatically resumes.

 Range  : 0.5 to 5.0 s (0.5 s steps)
 Default: 3.0 s

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

TX Dwell Time Help 
 This feature is not available in TK-260 or TK-360.

 TX Dwell Time interval from the end of the transmission to the
time scan automatically resumes.
 The "TX Dwell Time" is not effective in "Time Operate" scan.
 "Time Operate" scan is controlled only by "Dropout Delay Time"
 (works as Time Operate Time).

 Range  : 1.0 to 5.0 s (0.5 s steps)
 Default: 3.0 s

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Time Out Timer Help
 Time Out Timer sets the maximum period of time a user is allowed to 
continuously transmit at any one instance.
 Upon time out the radios transmitter is automatically disabled until
the PTT is released.

 Range  : Off/30 to 300 s (30 s steps)
 Default: 60 s

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

TOT Pre-Alert Help
 The TOT Pre-Alert function notifies the programmed time is expired.
 This should be set less than TOT value.

 Range  : Off/10 to 250 s (10 s steps)
 Default: Off.

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

TOT Rekey Time Help
 TOT Rekey-Time sets the "penalty" time in which the radio cannot be 
re-keyed for transmitting after the Time Out Timer setting is 
exceeded.

 Range  : Off/1 to 60 s (1 s steps)
 Default: Off.

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

TOT Reset Time Help
 TOT Reset Time sets the minimum "wait" time allowed between 
transmissions that will reset the Time Out Timer.
 When set this, causes the TOT continue even after PTT is released 
unless the TOT Reset Timer has expired.

 Range  : Off/1 to 15 s (1 s steps)
 Default: Off.

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Squelch Level Help
 Squelch Level is an analog reference level number that the radio's 
CPU uses to set the internal squelch threshold.
 This should be adjusted only when performing alignment using proper 
test equipment (see the service manual "Alignment" section).
 This feature is not available to operate on the radio
in TK-260 or TK-270.

 Range  : 0(Open) to 9(Tight)
 Default: 5

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Beep Tone Help
 The beep Tones for Control Tones, Power on Tone, and Warning Tone
(TOT tone, TOT Pre-alert tone, Busy Channel Lockout tone)
are enabled or disabled by the FPU.

 Yes    : Enable the Beep Tones.
 No     : Disable the Beep Tones.
 Default: Yes.

 Press the [F2] or [SPACE BAR] to alternate selection.

Signalling Help
 Signalling "AND"/"OR" sets the audio unmute condition for any 
channel programmed for 2-Tone or DTMF decode (option signalling).
 DQT and 2-Tone features are not available in TK-278 or TK-378/388.
 DTMF decode feature is not available in TK-260 or TK-360.

 AND    : "AND" requires both the valid Opt. Signalling and the
         programmed QT/DQT to be received for audio to unmute (and
         initiate an Opt. Sig. decode alert).
 OR     : "OR" requires either the valid Opt. Signalling or the
         programmed QT/DQT to be received for audio to unmute (an 
         Opt. Sig. alert is only initiated if the proper Opt. Sig.
         is decoded).
 Default: AND.

 Press the [F2] or [SPACE BAR] to alternate selection.

Battery Save Help
 Automatic battery saver during standby operation, the receiver 
circuit is cycled on & off to conserve battery life except in
Scan mode. 
 The "on" time is automatically selected by the current signal 
conditions.

 Enable : Enables the Battery Save function. 
 Disable: Disables the Battery Save function.
          In this case, sometimes the radio does not decode Option
         Signalling.
          We recommend to set the rise time or first digit time much
         longer on the caller side.(More than 200ms)
 Default: Enable.

 Press the [F2] or [SPACE BAR] to alternate selection.

Clear to Transpond Help
 The radio will wait during the ch is busy, then transponds when the
ch gets open.

 Yes    : Enable the Clear to Transpond feature.
 No     : Disable the Clear to Transpond feature.
 Default: No.

 Press the [F2] or [SPACE BAR] to alternate selection.

Selectable QT Help
 This feature is not available in TK-260 or TK-360.

 Selectable QT provides a menu of up to 39 sub-audible QT tones that 
the user can select to temporarily override the current channels 
39 pre-programmed tones (for access to different repeaters/talk 
groups).
 This feature is effective only when QT Frequency is displayed on
the radio's LCD.
 See radio's instruction manual to use this feature.

 Enable : Enables the Selectable QT function. 
 Disable: Disables the Selectable QT function.
 Default: Enable.

 Press the [F2] or [SPACE BAR] to alternate selection.

Del/Add Help
 This feature is not available in TK-260 or TK-360.

 This function deletes (adds) the channel from (to) the scan list.
 Priority channel is always included in scan list however it is
deleted.
 The scan feature does not start in one or no add channel condition.
 See radio's instruction manual to use this feature.

 Enable : Enables the DEL/ADD function. 
 Disable: Disables the DEL/ADD function.
 Default: Enable.

 Press the [F2] or [SPACE BAR] to alternate selection.

Dealer/Test Mode Help
 This feature is not available in TK-260 or TK-360.

 Enable or disable the Dealer/Test Mode function. 
 We recommend to set to disable after set up to keep contents.
 See S/M for details.

 Enable : Enables the Dealer/Test Mode function. 
 Disable: Disables the Dealer/Test Mode function.
 Default: Disable.

 Press the [F2] or [SPACE BAR] to alternate selection.

Tone 1 Help
 This feature is not available in TK-278 or TK-378/388.

 Set the first tone frequency of the two tone sequential
signalling from 288.0 Hz to 1500.0 Hz in 0.1 Hz steps.

 Range  : 288.0 to 1500.0Hz (0.1 Hz steps)
 Default: 321.7 Hz

Directly enter the frequency.

Tone 2 Help
 This feature is not available in TK-278 or TK-378/388.

 Set the second tone frequency of the two tone sequential
signalling from 288.0 Hz to 1500.0 Hz in 0.1 Hz steps.

 Range  : 288.0 to 1500.0Hz (0.1 Hz steps)
 Default: 928.1 Hz

Directly enter the frequency.

Group Call Help
 This feature is not available in TK-278 or TK-378/388.

 2-Tone Group Call in addition to the normal 2-Tone decode 
(individual call), a group call decode can be programmed for Tone 1
or Tone 2.
 Receiving 5 seconds of a single Tone 1 or Tone 2 will initiate the 
same decode alert sequence as a normal 2-Tone call.
 The Transpond function does not engage when group call is used.

 None   : Disable Group Call function.
 Tone 1 : Enables Tone1.
 Tone 2 : Enables Tone2.
 Default: None.

 Press the [F2] or [SPACE BAR] to alternate selection.

Alert Tone/Transpond Help
 This feature is not available in TK-278 or TK-378/388.

 2-Tone Alert Tone/Transpond with acknowledgment upon valid 2-Tone 
decode.

 Off       : None
 Alert Tone: Sounds three beeps from the speaker after 2-Tone decode 
            to inform the user.
 Transpond : The radio transmits automatically with a tone
            (approx. 1kHz, 2sec) for acknowledgment to the caller
            after a valid 2-Tone decode.
             This tone also sounds from the speaker.
             Refer "Clear to Transpond" feature in the optional
            feature screen.
             The radio does not transpond when called by Group Call.
             In scan mode, transpond feature always uses "Talkback".
 Default   : Alert Tone.

 Press the [F2] or [SPACE BAR] to alternate selection.

Auto Reset Help
 This feature is not available in TK-278 or TK-378/388.

 Automatically resets the 2-Tone decoder and mutes speaker audio
10 seconds after a valid decode. 
 This frees the user from having to manually reset with the monitor
key.
 The timer starts after carrier drops.

 On     : Enables Auto Reset function. 
 Off    : Disables Auto Reset function. 
 Default: On.

 Press the [F2] or [SPACE BAR] to alternate selection.

Digit Time Help
 DTMF Digit Time sets the time length of individual DTMF digit 
during the Autodial functions (PTT ID, Connect/Disconnect ID, etc.).
 This parameter and the Inter Digit Time sets the duty cycle normally 
setting the Digit Time equal to the Inter Digit Time (50/50 duty 
cycle) is sufficient.

 Range  : 50 to 200 ms (10 ms steps)
 Default: 50 ms

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Inter Digit Time Help
 DTMF Inter Digit Time sets the time between individual DTMF digits 
during the Autodial functions (PTT ID, Connect/Disconnect ID, etc.).
 This parameter with the Digit Time sets the duty cycle normally 
setting the Digit Time equal to the Inter Digit Time (50/50 duty 
cycle) is sufficient.

 Range  : 50 to 200 ms (10 ms steps)
 Default: 50 ms

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

First digit Time Help
 DTMF First Digit Time sets the length of the first DTMF digit
longer than subsequent digits (for system/decoder attack 
considerations).

 Range  : 50 to 200 ms (10 ms steps)
 Default: 50 ms

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Rise Time Help
 Rise Time sets the time delay between the start of transmit to 
sending the first DTMF digit (for system/decoder attack 
considerations).
 Making this value longer has a similar effect as setting the First
Digit Time longer.
 We recommend to set much longer if the station you want to call
has battery save function.
 Refer "Battery Save" feature in the optional feature screen.

 Range  : 100 to 1000 ms (50 ms steps)
 Default: 100 ms

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Rise Time with QT Help
 Rise Time sets the time delay from the start of transmission to
sending the first DTMF digit (for system/decoder attack 
considerations).
 This has the same effect as setting the First Digit Time longer.
 This function also works on DQT (except TK-278/378/388) channels.

 Range  : 100 to 1000 ms (50 ms steps)
 Default: 100 ms

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

PTT ID Help
 PTT ID Provides a DTMF ANI to be sent with every PTT (Connect ID at 
Beginning of Transmit (BOT), Disconnect ID at End of Transmit (EOT),
or Both).
 Programmable per channel On/Off in the Channel Info. screen-PTT ID 
column, but must be enabled and be programmed Connect ID or
Disconnect ID first in the Edit-DTMF section for PTT ID work.

 Off       : Disable PTT ID
 Connect   : Allows the Connect ID to be sent when PTT is engaged.
 Disconnect: Allows the Disconnect ID to be sent when PTT is 
            released.
 Both      : Allows the Connect ID to be sent when PTT is engaged 
            and the Disconnect ID to be sent when PTT is released.
 Default   : Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

Dial ID Help
 This feature is not available in TK-260 or TK-360.
 For manually sending the pre-programmed Connect/Disconnect
ID codes using a programmed "Dial" key and a DTMF keypad.

 Enable : Enable the Dial ID function.
          To use this feature, "Dial key" in the key assignment
         screen must be enable, and be programmed Connect ID or
         Disconnect ID in the Edit-DTMF screen.
          Connect ID        :[Dial],[*]
          Disconnect ID     :[Dial],[#]
 Disable: Disable the Dial ID function.
 Default: Disable.

 Press the [F2] or [SPACE BAR] to alternate selection.

Connect ID Help
 Enter the radio's  programmable Connect ID data.

 Range  : 0-9/A-D/*/# (Maximum 16 Digits)
 Default: Blank.

 Enter the required code directly.

Disconnect ID Help
 Enter the radio's  programmable Disconnect ID data.

 Range  : 0-9/A-D/*/# (Maximum 16 Digits)
 Default: Blank.

 Enter the required code directly.

No. of DTMF Key Help
 This feature is not available in TK-260 or TK-360.

 Selection of the 4th column key board function. (A, B, C, D keys)

 12Keys  : 4th column (A, B, C, and D) cannot be used for only
          DTMF manual encode keys.
 16Keys  : 4th column (A, B, C, and D) set for DTMF manual encode
          keys.
 Default: 12Keys.

 Press the [F2] or [SPACE BAR] to alternate selection.

DTMF Hold Time Help
 This feature is not available in TK-260 or TK-360.

 DTMF Hold Time holds the transmitter keyed for two seconds after
releasing a DTMF key. 
 The PTT must be pressed first to activate the DTMF keypad.
 Press PTT to start transmit.
 Press a DTMF key, the radio maintains the transmission approx. 
 2 seconds after releasing the DTMF button even if PTT is released
in DTMF manual operation.

 On      : Enable the DTMF Hold Time function.
 Off     : Disable the DTMF Hold Time function.
 Default : On.

 Press the [F2] or [SPACE BAR] to alternate selection.

Store and Send Help
 This feature is not available in TK-260 or TK-360.

 Store and Send function allows a DTMF number to be entered and
stored into temporary "scratch pad" memory then sent by Dial key.
 This is faster then manual dialing and thus conserves air time 
usage.

 On      : Enable the Store and Send function.
           See radio's instruction manual to operate.
 Off     : Disable the Store and Send function.
 Default : Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

D Key Assignment Help
 D Key Assignment allows the "D" symbol to be used as a pause period
in the Autodial, Connect ID, Disconnect ID, Store and Send DTMF code
strings. 
 "D Code" assignment means it is a DTMF "D".

 Range  : D code/1 to 16 s (1 s steps)
 Default: D Code.

 Press the [F2] or [SPACE BAR] to increase selection.

Autodial Memory Help
 This feature is not available in TK-260 or TK-360.
   
 There are 10 Autodial memories available.

 Range  : 0-9/A-D/*/# (Maximum 16 Digits each)
 Default: Blank.

 Type the required code directly. 
 To use this feature, "Dial key" in the key assignment screen must
be enable.
 See radio's instruction manual to operate.

DTMF Signalling Help
 This feature is not available in TK-260 or TK-360.

 Select from two types of DTMF decode schemes Code SQ (normal)
or Selective Call (special).
 "CODE SQ" is the normal DTMF decode (3 digits (min.)
10 digits (max.)).
 Call Alert or Transpond is available as a decode response.
 "Selective Call" is the special nine digit "structured" DTMF
selective calling format can provide individual decode, five
character status display or caller ID, and group/subgroup calling.
 Call Alert or Transpond is available as a decode response.
 See Group Code for group calling feature.

 Off           : Disable the DTMF Signalling function.
 CODE SQ       : Code SQ controls audio mute, Call alert, and 
                transpond.
                 Program from 3 to 10 digits code for Code SQ per
                channel in the channel information screen.
                 And refer signalling AND/OR feature in the 
                optional feature screen.
 Selective Call: Selective Call function controls Audio mute, Call
                alert, Transpond, Status, and Display.
                 4 digits DTMF (consists of 3 digits ID code set for
                each channel and 1 digit Intermediate Code) controls
                audio mute, Call alert, and transpond.
                 The radio displays the data after the intermediate
                code 5 digits (max).
                 Program 3 digits code for Selective Call per
                channel in the channel information screen and
                program 1 digit intermediate code in the Edit-DTMF
                screen.
                 Refer signalling AND/OR feature in the optional
                feature screen.
 Default       : Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

Intermediate Code Help
 This feature is not available in TK-260 or TK-360.

 The single digit intermediate code is used as a distinguishing
separator between the three digits ID code and five digits (max)
status code should be displayed in the Selective Call Mode.
 Refer "Selective Call" in the Edit-DTMF screen.

 Range  : 0-9/A-D/*/# (1 Digit)
 Default: #.

 Press the [F2] or [SPACE BAR] to alternate selection.

Group Code Help
 This feature is not available in TK-260 or TK-360.

 A Group Code "wild card" character can be programmed as
DTMF characters A,B,C,D,"*", or "#".
 If the radio receives a valid ID code with one to all of it's digits
substituted with this "wild card" Group Code, it will decode.
 This provides multiple group and subgroup calling.
 The group call using this Group Code is effective in either Code SQ,
Selective Call feature.
 Called station by Group Call does not transpond.

for example,
Group Code C
              (A)  (B)  (C)  (D)
Waiting Code  123  223  235  355

 The Base calls using "C23", then (A) and (B) receive this call.
 The Base calls using "CC5", then (C) and (D) receive this call.
 The Base calls using "CCC", then all Stations receive this call.
 
 Range  : Off/A-D/*/# (1 Digit)
 Default: Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

Auto Reset Time Help
 This feature is not available in TK-260 or TK-360.

 Automatically resets the DTMF decoder and mutes speaker audio
within a programmable period after a valid decode.
 This frees the user from having to manually reset with the monitor
key. 
 The timer starts after carrier drops.

 Range  : Off/1 to 15 s (1 s steps)
 Default: 10 s

 Press the [F2] or [SPACE BAR] to increase selection.

Call Alert/Transpond Help
 This feature is not available in TK-260 or TK-360.

 After a valid of DTMF decode one of the following radio response
can be programmed.

 Off       : No audible call alert. Radio unmutes.
             Flashes orange LED and displays a "-" on the LCD.
 Call Alert: Call alert in speaker audio (telephone-like ringing).
             Radio unmutes.
             Radio Flashes orange LED and displays a "-" on the LCD.
             The Call Alert tone when called by Group Call is
            several times beep.
             This is different from individual call.
 Transpond : Radio transponds programmed contents. Refer "Transpond"
            in the Edit-DTMF screen.
             Then radio unmutes.
             Then radio Flashes orange LED and displays a "-" on the
            LCD after Transpond.
             The radio does not transpond when called by Group Call.
             Refer "Clear to Transpond" feature in the Optional
            feature screen.
             In scan mode, transpond feature always uses "Talkback".
 Default   : Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

Transpond Help
 This feature is not available in TK-260 or TK-360.

 You can set up the contents of Transpond.

 Call Alert (tone)
               : The telephone-like ringing tone same as
                "Call Alert" will transpond, and sounds from
                the radio. 
 ID Code       : The code (same as the received ID code) will
                transpond, and sounds from the radio.
 Transpond Code (Autodial Memory 0)
               : The contents memorized in "Auto Dial Memory 0" will
                Transpond, and sounds from the radio. 
                 Autodial Memory "0" must be programmed for DTMF
                transpond work.
 Default       : Call Alert.

 Press the [F2] or [SPACE BAR] to alternate selection.

Number of Trunking Channels Help
 This feature is not available in TK-260 or TK-360.

 The Number of Trunking Channels sets the number of trunking 
channels that are used in a trunking system.

 Blank  : No change to the data set in the Trunking Board.
 Range  : 1 to 16 
 Default: Blank.

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Primary Code Help
 This feature is not available in TK-260 or TK-360.

 The Primary Code consists of a four digits number that is
contained in the SmarTrunk II digital transmission.
 Any four digits number from 0000 to 9999 may be used.
 "****" is displayed on the screen.

 Blank  : No change to the data set in the Trunking Board.
 Range  : 0000 to 9999
 Default: Blank.

 Type the required code directly.
 SmarTrunk II is a registered trademark of Selectone Corporation.
 
Secondary Code Help
 This feature is not available in TK-260 or TK-360.

 The Secondary Code consists of a four digits number that is 
contained in the SmarTrunk II digital transmission.
 Any four digits number from 0000 to 9999 may be used.
 "****" is displayed on the screen.
 
 Blank  : No change to the data set in the Trunking Board.
 Range  : 0000 to 9999
 Default: Blank.
 
 Type the required code directly.
 SmarTrunk II is a registered trademark of Selectone Corporation.

Priority Subscriber Enable Help
 This feature is not available in TK-260 or TK-360.

 Enabling the Priority Subscriber Enable makes a subscriber unit a
Priority Subscriber.
 A Priority Subscriber can preempt calls currently in progress on the
trunking system.
 Care must be exercised when using this feature.
 A priority subscriber can terminate important calls of other 
subscribers.
 If too many priority subscribers are enabled, the priority 
subscribers themselves will be competing for trunking channels.
 Additional trunking channels should be installed if the system is
heavily loaded.

 Blank  : No change to the data set in the Trunking Board.
 Enable : Enables the Priority Subscriber Enable function.
 Disable: Disables the Priority Subscriber Enable function.  
 Default: Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.
 
Five Digit Access Code Help
 This feature is not available in TK-260 or TK-360.

 The access code allows the dealer to enter the Trunking Board 
programming mode and keeps others from surreptitiously using the 
programming mode.
 The access code is dealer programmable, and may be set to any five
digit number 00000 to 99999.
 Be sure to write down the new access code.
 If the access code is lost or forgotten, access to the Trunking
Board programming mode will be impossible.
 "*****" is displayed on the screen.

 Blank  : No change to the data set in the Trunking Board.
 Range  : 00000 to 99999
 Default: Blank.

 Type the required code directly.

Trunking System ID Number Help
 This feature is not available in TK-260 or TK-360.

 All subscriber units on a trunking system must be programmed with 
the same trunking system ID number.
 Subscriber units can only access Trunking Boards with matching 
Trunking System ID Numbers.
 For example, if a subscriber unit with a trunking system ID number
of 1 tries to access a trunking system with trunking system ID 
number of 5, access will be denied.
 If you wish to allow subscriber units to roam on different 
Trunking systems, all trunking system ID numbers must be identical.

 Blank  : No change to data set in the Trunking Board.
 Range  : 0 to 31
 Default: Blank.

 Press the [F2] or [SPACE BAR] to increase selection.
 Otherwise enter required duration directly.

Automatic PTT Mode Help
 This feature is not available in TK-260 or TK-360.

 The Automatic PTT mode makes radio operation simple for the 
subscriber.
 With this mode enabled, the subscriber simply presses the transmit
switch on the transceiver to gain channel access.
 The Trunking Board will automatically call the subscriber's 
Secondary code for fleet- dispatch type trunking systems. 
 No keypad entry is required to operate in this mode.

 Blank  : No change to the data set in the Trunking Board.
 Enable : Enables the Auto PTT function.
 Disable: Disables the Auto PTT function.  
 Default: Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.

Emergency Call Override Help
 This feature is not available in TK-260 or TK-360.

 When a subscriber places an emergency call by using routing code 0,
the Trunking Board will dial the preprogrammed emergency phone number 
on line 1.

 Blank  : No change to the data set in the Trunking Board.
 Enable : Enables the Emergency Override function.
 Disable: Disables the Emergency Override function.  
 Default: Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.

Conventional Mode Control Help
 This feature is not available in TK-260 or TK-360.

 Conventional mode on 17 to 32 channel can be disabled,
or unrestricted.

 Blank       : No change to the data set in the Trunking Board.
 Disable     : Disables the Conventional Mode Control function. 
 Unrestricted: The Trunking Board will stay in conventional mode on
              until the user switches back to SmarTrunk II operation.
 Default     : Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.
 SmarTrunk II is a registered trademark of Selectone Corporation.

Clear Channel Alerting Mode Help
 This feature is not available in TK-260 or TK-360.

 Clear channel alerting mode notifies the subscriber when a radio 
channel becomes available after access failure by repeater busy.

 Blank  : No change to the  data set in the Trunking Board.
 Enable : Enables the Clear Channel Alert function.
 Disable: Disables the Clear Channel Alert function.  
 Default: Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.

Radio-Kill Help
 This feature is not available in TK-260 or TK-360.

 The Radio Kill Status is used to reactivate a transceiver that has
been remotely disabled with the Radio Kill function from the 
SmarTrunk II Digital Trunking Controller.

 Blank    : No change to the data set in the Trunking Board. 
 Active   : Enables the Radio Kill function.  
 Disactive: Disables the Radio Kill function.  
 Default  : Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.
 SmarTrunk II is a registered trademark of Selectone Corporation.
 
Memory Speed-Dialing Programming Help
 This feature is not available in TK-260 or TK-360.

 The Memory Speed Dialing Programming controls a subscriber's 
ability to program speed dial numbers.
 If enabled, the subscriber can program speed dial numbers using the
transceiver's keypad.
 If it is disabled, the subscriber can not program speed dial 
numbers.
 This does not prevent a subscriber from speed dialing if numbers 
have been programmed.
 The System Operator/Manager can pre-program some memory speed dial 
numbers for the subscriber, and then disable the Memory Speed Dial 
Programming.
 The subscriber can then call the System Operator/Manager's 
programmed numbers.

 Blank  : No change to the data set in the Trunking Board.
 Enable : Enables the Memory Speed-Dialing Programming function.
 Disable: Disables the Memory Speed-Dialing Programming function.
 Default: Blank.

 Press the [F2] or [SPACE BAR] to alternate selection.

RX Frequency Help
 Receive-only channels are allowed.
 Frequencies can only be programmed using the proper step size.
 VHF : 100MHz to 280MHz 
 UHF : 327MHz to 550MHz

 Type the required receive frequency directly.

 To delete channel data, 
  a)Place the cursor on the channels receive frequency.
  b)Press and hold the <Delete> key until the receive
    frequency is erased.
  c)Hit <Enter>.
 The channel data will be erased and left blank.
 New channel data can be manually entered.

TX Frequency Help
 Frequencies can only be program  using the proper step size.
 VHF : 100MHz to 280MHz 
 UHF : 327MHz to 550MHz

 Type the required transmit frequency directly.
 
QT/DQT Help
 QT : 67.0 to 250.3Hz (in 0.1Hz steps)
 DQT: codes 000 to 777
       This feature is not available when the Model Type is TK-278 
      or TK-378/388. (defaults to normal codes) 
      enter D###N (normal)
            D###I (inverted)
 -or-
 Press the [F2] to open the QT/DQT list,
 QT : 67.0 to 250.3Hz
 DQT: codes 023 to 754 
then select.

 Type the required tone or code directly.

Option Signalling Help
 Option signalling (2-Tone, DTMF) and QT/DQT feature have
AND/OR setting. 
 Refer "Signalling" feature in the Optional feature screen.

 TK-260/360
 Selects 2Tone decode per channel.
 None   : Disable the Option Signalling function.
 2Tone  : Enable the 2-Tone function.
 Default: None.

 TK-270/370
Selects DTMF or 2Tone decode per channel.
 None   : Disable the Option Signalling function.
 DTMF   : Enable the DTMF function.
 2Tone  : Enable the 2-Tone function.
 Default: None.

 TK-278/378/388
 Selects DTMF decode per channel.
 None   : Disable the Option Signalling function.
 DTMF   : Enable the DTMF function.
 Default: None.

 Set the decoder tone or code in the Edit menu.

 Press the [F2] or [SPACE BAR] to alternate selection.

PTT ID Help
 PTT ID Provides a DTMF ANI to be sent with every PTT (Connect ID at 
Beginning of Transmit, Disconnect ID at END of Transmit, or Both).
 Programmable per channel On/Off in the Channel Info. screen-PTT ID 
column, but must be enabled and be programmed Connect ID or
Disconnect ID first in the Edit-DTMF section for PTT ID work.

 On     : Enable the PTT ID function.
 Off    : Disable the PTT ID function.
 Default: Off.

 Press the [F2] or [SPACE BAR] to alternate selection.

Busy Channel Lockout Help
 TX is inhibited when the channel is busy.
 Transpond of Option Signalling is controlled by "Clear to Transpond"
feature in Optional feature screen.

 TK-260/270/360/370
 No     : Transmission is independent from QT/DQT signalling.
 Yes    : Transmission is only possible when a QT/DQT signal match
         occurs.
 Default: No.

 TK-278/378/388
 No     : Transmission is independent from QT or DTMF signalling.
 1      : Transmission is only possible when a QT signal match
         occurs.
 2      : With the signalling parameter set to "AND", transmission
         is only possible when both QT and DTMF signal matches
         occur.
          With the signalling parameter set to "OR", transmission
         is possible when either QT or DTMF signal (or both)
         match(es) occur(s).

          This function was newly designed, so it will be available
         on radios that have the following or larger serial numbers:
         TK-278 S/No. 802XXXXX-
         TK-378 S/No. 801XXXXX-
         TK-388 S/No. All numbers
 Default: No.

 Press the [F2] or [SPACE BAR] to alternate selection.

Beat Shift Help
 Shifts the microprocessor system clock frequency per channel to 
prevent interference.

 Yes    : Enable the Beat Shift function.
 No     : Disable the Beat Shift function.
 Default: No.

 Press the [F2] or [SPACE BAR] to alternate selection.

RF Power Help
 Select High or Low RF Power.

 Hi     : High Power.
 Low    : Low Power.
 Default: Hi.

 Press the [F2] or [SPACE BAR] to alternate selection.

Scan DEL/ADD Help
 This feature is not available in TK-260 or TK-360.

 DEL    : Deletes the CH from the SCAN map.
 ADD    : Adds the CH to the SCAN map.
 Default: ADD.

 Press the [F2] or [SPACE BAR] to alternate selection.

ID Code Help
 This is the sequence code as station ID for waiting for
DTMF signalling.
 Before program these codes, select "DTMF signalling"
Code SQ or Selective Call in Edit-DTMF screen.

 Code SQ
 Range  : 000 to 9999999999 (1 steps)
          Set 3 digits (min.) to 10 digits (max.).
 Default: 000

 Selective Call
 Range  : 000 to 999 (1 steps)
          Set 3 digits.
 Default: 000

 Type the required code directly.

Priority Channel Help
 Fixed Priority select function.
 If the Priority Channel is set to Fixed, select a priority channel
before writing to the radio or saving to the database.

Channel Copy Help
 Copies the entire channel data to another channel(s).

 Use SHIFT + F3 to copy a channel.

Frequency Copy Help
 Copies a channels RX frequency to the TX column.

 Use Shift + F4 to copy an RX frequency.

QT/DQT Copy
 Copies a channels Decode QT/DQT to the Encode column.

 Use Shift + F5 to copy Decode QT/DQT.

Channel Delete Help
 Delete a channels.

 Use Shift + F10 to delete a channel.

Channel Insert Help
 Insert a channels.

 Use Shift + F9 to insert a channel.

Read from Radio Help
 Read all program data from the radio.

 -- select & press [ENTER].

Write to Radio Help
 Write all currently loaded program data into the radio's EEPROM 
memory.
 Verify that the Model Name in the current data matches that of the 
target radio you are about to program.

 -- select & press [ENTER].

Write to Trunking Board Help
 You can write the Trunking data at the "program" window when you set
 "Trunking board is installed" at the Model window.

 -- select & press [ENTER].

Test Mode Frequency Help
 There are two methods to select the test frequency in the Test Mode.
 1. Press the up/down arrow keys to change test channels available in 
   the radio. 
 2. Type frequency values directly by using the numeric keys and 
   press the enter key.

Test Mode Signalling Help
 Press the up/down arrow keys to change signalling channels 
available in the radio. 

RF High Power
 Preset RF High Power level adjustment.

 Press <- or -> to increase/decrease selection.

RF Low Power
 Preset RF Low Power level adjustment.

 Press <- or -> to increase/decrease selection.

Battery
 Preset Battery level adjustment.
 This function alerts when battery voltage is not sufficient to 
operate.
 1. Connect the radio to the external power supply.
 2. Set the voltage of external power supply to desired value.
    (Normal value is 6.0V D.C. = factory presetting)
 3. Enter to PC Tuning - Battery screen.
 4. Adjust the indicator using arrow key until red LED on the radio
   starts to flash.
    Refer radio's service manual.

 Press <- or -> to increase/decrease selection.

Squelch (Tight)
 Preset Squelch (Tight) level adjustment.

 Press <- or -> to increase/decrease selection.

Squelch (Open)
 Preset Squelch (Open) level adjustment.

 Press <- or -> to increase/decrease selection.

QT Deviation
 Preset QT Deviation level adjustment.
 The radio generates selected QT.
 If QT is not selected, the radio generates 67.0Hz QT automatically.

 Press <- or -> to increase/decrease selection.

DQT Deviation
 Preset DQT Deviation level adjustment.
 The radio generates D023N automatically.

 Press <- or -> to increase/decrease selection.

Print Tuning Data Help
 Print out currently memorized Tuning Data.

Communication Port Help
 Select the COM level of the computer's serial communication port
for programming.

 There are two choices, COM1 or COM2.
 COM level settings in your computer may be dependent on internal 
hardware and/or setup software settings; check your computer manuals
for details.

 Press the [F2], [SPACE BAR] to alternate selection.

Black & White Help
 Monochrome display mode.
 
Display Back Color Help
 Main window's background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Input Data Color Help
 Input data cursor color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Feature Highlight Color Help
 Sub window's selected feature cursor background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Screen Border Information Color Help
 Outside of main window's border information background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Windows Menu Color Help
 Main menu bar sub window's background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

General Message Color Help
 Important information window's background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Windows Color Help
 Sub menu bar sub window's background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Help Window Color Help
 Help window's background color.

 Press the [F2] or [SPACE BAR] to alternate selection.

Help Path Help
 Help message files are contained in this program under 
KPG27D\KPG27D.HLP.
 The drive and path statement that this program uses to access these
messages are initially set to A:\KPG27D.

 Type the required drive and path.

End Of Help File
