WB4QXE ATV430   PARTS  LIST
       -- LOCAL  OSCILLATOR --


Q1 ---------------- MFP102, FET
Q2 ---------------- 2N2222A

U1 ---------------- MSA-0104, AVANTEK
U2 ---------------- MSA-0304, AVANTEK

U3 ---------------- 78L10  ( DIGIKEY )

C0 ---------------- 22 pf, MONOLITHIC
                    ( MOUSER 21RD722 )

C1,C2,C3,C4 ------- .01 uf, MONOLITHIC
                    ( MOUSER  21RX410 )

C5,C7,C15 --------- .001 uf, FEEDTHROUGH CAP.
                    ( HOSFELT  NCFC-D )

C6,C8,C13,C14 -----    470 pf, CHIP CAPACITOR
                    ( MOUSER  140-CC502N471J )

C9,C10,C11,C12 ---- 3.5 - 20 pf, TRIM CAP.
                    ( MOUSER 24AA072 )

C16 --------------- 2.2 uf, TANT. CAP.
                    ( DIGIKEY P2045 )

D1 ---------------- 1N914 or HOT CARRIER

***  RESISTORS: ---- 1/4 wt., CARBON, 5% ***

R1 ----- 100 K  OHMS
R2 ----- 10 K  OHMS
R3 ----- 10 OHMS
R4 ----- 3.3 K  OHMS
R5 ----- 200 OHMS
R6 ----- 220 OHMS
R7 ----- 470 OHMS
R8 ----- 180 OHMS

T1 ----------------- 5 T. TWISTED PAIR, BIFILAR
                     THRU FERRITE BEAD- 43 MATL.
                     .180 Dia x .200 LONG

L1 ----------------- XX TURNS #30 ENAMEL
                     ON SLUG-TUNED "SODASTRAW"
                     .2" OD, SUPER-GLUE IN HOLE
                     IN BOARD.
                     -- COLD SIDE LINK, 2 T.

L2 ----------------- 10 T. #30 ENAMEL WOUND
                     OVER 100K, 1\4 wt. RESISTOR

XTAL --------------- THIRD OVERTONE ..In MHz--

               XTAL FREQ = ( OP. FREQ. - 61.25 ) / 8
               For input from "ch. 3  RF Modulator"